ich stehe gerade auf dem Schlauch. Meine Steuerung mit einem Relais funktioniert ohne Probleme. Jetzt will ich ein weitere Relais der Steuerung hinzufügen.
Das zweite Relais, ein Shelly 1 mit Tasmota wird in der Steuerung unter "Verwendete Relais" erkannt und bei einem Klick auf Test schaltet das Relais.
Es erscheint nur kein "Steuerung Steuerkreis 2", wo ich die Leistungsparameter für das zweite Relais eingeben kann.
Das solaranzeige.log sagt folgendes:
Code: Alles auswählen
24.09. 16:20:20 |---------------- Start sonoff_mqtt.php ---------------------
24.09. 16:20:20 + -Die Daten werden ausgelesen...
24.09. 16:20:20 -Es handelt sich um ein Shelly 1 Nr.: 0 Firmware: 13.1.0(tasmota)
24.09. 16:20:20 -Alle 10 Minuten werden die Statistikdaten übertragen.
24.09. 16:20:20 -InfluxDB => [ AC Spannung=,Strom=,Leistung=0,Scheinleistung=,Blindleistung= 1695565201
Service Status="Online",Temperatur=0,Powerstatus=0 1695565201
Summen Wh_Heute=0,Wh_Gesamt=0,Wh_Gestern=0 1695565201
]
24.09. 16:20:20 -Daten nicht zur lokalen InfluxDB gesendet! info: array (
'url' => 'http://localhost/write?db=solaranzeige3&precision=s',
'content_type' => 'application/json',
'http_code' => 400,
'header_size' => 431,
'request_size' => 350,
'filetime' => -1,
'ssl_verify_result' => 0,
'redirect_count' => 0,
'total_time' => 0.00803,
'namelookup_time' => 0.001464,
'connect_time' => 0.001972,
'pretransfer_time' => 0.002238,
'size_upload' => 192.0,
'size_download' => 150.0,
'speed_download' => 18750.0,
'speed_upload' => 24000.0,
'download_content_length' => 150.0,
'upload_content_length' => 192.0,
'starttransfer_time' => 0.007883,
'redirect_time' => 0.0,
'redirect_url' => '',
'primary_ip' => '::1',
'certinfo' =>
array (
),
'primary_port' => 8086,
'local_ip' => '::1',
'local_port' => 59024,
'http_version' => 2,
'protocol' => 1,
'ssl_verifyresult' => 0,
'scheme' => 'HTTP',
'appconnect_time_us' => 0,
'connect_time_us' => 1972,
'namelookup_time_us' => 1464,
'pretransfer_time_us' => 2238,
'redirect_time_us' => 0,
'starttransfer_time_us' => 7883,
'total_time_us' => 8030,
)
24.09. 16:20:25 -InfluxDB => [ AC Spannung=,Strom=,Leistung=0,Scheinleistung=,Blindleistung= 1695565201
Service Status="Online",Temperatur=0,Powerstatus=0 1695565201
Summen Wh_Heute=0,Wh_Gesamt=0,Wh_Gestern=0 1695565201
]
24.09. 16:20:25 -Daten nicht zur lokalen InfluxDB gesendet! info: array (
'url' => 'http://localhost/write?db=solaranzeige3&precision=s',
'content_type' => 'application/json',
'http_code' => 400,
'header_size' => 431,
'request_size' => 350,
'filetime' => -1,
'ssl_verify_result' => 0,
'redirect_count' => 0,
'total_time' => 0.008721,
'namelookup_time' => 0.000215,
'connect_time' => 0.000225,
'pretransfer_time' => 0.000487,
'size_upload' => 192.0,
'size_download' => 150.0,
'speed_download' => 18750.0,
'speed_upload' => 24000.0,
'download_content_length' => 150.0,
'upload_content_length' => 192.0,
'starttransfer_time' => 0.008586,
'redirect_time' => 0.0,
'redirect_url' => '',
'primary_ip' => '::1',
'certinfo' =>
array (
),
'primary_port' => 8086,
'local_ip' => '::1',
'local_port' => 59024,
'http_version' => 2,
'protocol' => 1,
'ssl_verifyresult' => 0,
'scheme' => 'HTTP',
'appconnect_time_us' => 0,
'connect_time_us' => 225,
'namelookup_time_us' => 215,
'pretransfer_time_us' => 487,
'redirect_time_us' => 0,
'starttransfer_time_us' => 8586,
'total_time_us' => 8721,
)
Viele Grüße
Bernd