Growatt ShineWiFi-X Wechselrichter aus chinesischer Cloud befreien

[Pi4]

Growatt ShineWiFi-X: Wechselrichter aus chinesischer Cloud befreien

mt Open Inverter Gateway und in Grafana darstellen geht auch damit

Anleitung Link: (dort gibt es auch ein Video)

https://www.kuketz-blog.de/growatt-shin ... -befreien/

Firmware:

https://github.com/OpenInverterGateway/ ... terGateway

Supported sticks/microcontrollers

ShineWifi-S with a Growatt Inverter connected via serial (Modbus over RS232 with level shifter)
ShineWifi-X with a Growatt Inverter connected via USB (USB-Serial Chip from Exar)
Wemos-D1 with a Growatt Inverter connected via USB (USB-Serial Chip: CH340)
NODEMCU V1 (ESP8266) with a Growatt Inverter connected via USB (USB-Serial Chip: CH340)
ShineWifi-T (untested, please give feedback)
Lolin32 (ESP32) with a Growatt Inverter connected via USB

I tested several ESP8266-boards with builtin USB-Serial converters so far only boards with CH340 do work (CP21XX and FTDI chips do not work). Almost all ESP8266 modules with added 9-Pin Serial port and level shifter should work with little soldering via Serial.

See the short descriptions to the devices (including some pictures) in the "Doc" directory.
---------------------------------------------------------------------------------------------------------------------
Supported Inverters

Growatt 1000-3000S
Growatt MIC 600-3300TL-X (Protocol 124 via USB/Protocol 120 via Serial)
Growatt MID 3-25KTL3-X (Protocol 124 via USB)
Growatt MOD 3-15KTL3-X-H (Protocol 120 via USB)
Growatt MOD 12KTL3-X (Protocol 124 via USB)
Growatt MID 25-40KTL3-X (Protocol 120 via USB)
Growatt SPH 4000-10000STL3-X BH (Protocol 124 via Serial)
And others ....

Aktuelleres auf der Seite bei github